208 Products
  • Volt24
  • Amps260
  • ConditionNew
  • Mount Hole ID 112.200mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole ID 312.200mm
  • Mount Hole 3 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/2-13
  • PolarityNegative
  • See More See Less
  • Critical NoteRegulator sold separately Meets J1113 Standard for Electromagnetic Interference Suppression
  • Volt12
  • Amps350
  • ConditionNew
  • Rotation DirectionClockwise / Counter Clockwise
  • Mount Hole ID 113.200mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole 2 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/2-13
  • PolarityNegative
  • Brushless Design
  • Recommended regulator CEN-A2-128
  • Custom 7" Hinge Mounting Configuration
  • See More See Less
  • Critical NoteThe Only Components That Can Be Serviced on This Unit Are the Cover, Fan, Pulley & Regulator@ Rebuilding This Unit Voids the Hazardous Location Certification
  • Volt24
  • Amps60
  • ConditionNew
  • Mount Hole ID 15/16-18
  • Mount Hole 1 TypeThreaded
  • Mount Hole 2 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationInternal
  • PolarityInsulated
  • 1-Wire@ CSA/UL Listed as CLASS 1, DIV 2 GROUP D for Use in Hazardous Locations
  • See More See Less
  • Lester8925
  • Volt24
  • Amps260
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM12x1.75
  • Brushless
  • See More See Less
  • Critical NoteIncludes C703 Unit with Cable Clamp, Fan Guard and Eye Bolt
  • Volt24
  • Amps350
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM12x1.75
  • Brushless@ Direct Replacement for 50DN
  • See More See Less
  • Critical NoteRegulator sold separately.
  • Volt12
  • Amps400
  • ConditionNew
  • Mount Hole ID 113.100mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole ID 2M12x1.75
  • Mount Hole 2 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal IDB+
  • Terminal SizeM12x1.75
  • Terminal ID 2B-
  • Terminal 2 SizeM10x1.5
  • PolarityNegative
  • Shaft Pulley OD22.200mm
  • Brushless Design
  • 225 Amp Output at Idle
  • Custom 7" Hinge Mounting Configuration
  • Recommended regulator CEN-A2-155
  • See More See Less
  • Critical NoteRegulator sold separately
  • Volt12
  • Amps360
  • ConditionNew
  • Mount TypePad
  • Pad Span Length126.24
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole 3 TypeUnthreaded
  • Mount Hole 4 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • PolarityNegative
  • Brushless Design
  • Over Voltage Cut Out Circuit
  • Modular Rectifier Assembly
  • Features Bi-Directional Fan
  • Recommended regulator CEN-A2-348
  • See More See Less
  • Critical NoteSame as C803 but Includes Fan Guard, Eye-Bolt, Wire Clamp & Air Intake
  • Volt24
  • Amps525
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/2-13
  • PolarityNegative
  • Includes Fan@ 325 Amps Output at Idle@ Internally Rectified@ 4" Fresh Air Duct Vent for High Temperature Engine Compartments@ Serviceable Diodes
  • See More See Less
  • Lester7590, 7591
  • Critical NoteRegulator sold separately. When Replacing #A1-608 with a #C630, There Is a 1mm Height Difference in the Pulley Shoulder@ This May Cause the Pulley Nut to Bottom Out on the Shaft Before the Pulley Is Properly Secured in Certain Applications
  • Volt12
  • Amps350
  • ConditionNew
  • Mount TypeJ180
  • Mount Hole ID 11/2-13
  • Mount Hole 1 TypeThreaded
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole ID 313.100mm
  • Mount Hole 3 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/2-13
  • PolarityNegative
  • Shaft Pulley OD0.874"
  • Shaft Pulley OD22.200mm
  • Recommended regulator CEN-A2-121
  • See More See Less
  • Volt12
  • Amps80
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationInternal
  • Terminal ID 2B+
  • Terminal 2 Size1/4-20
  • Brushless
  • See More See Less
  • Volt24
  • Amps260
  • ConditionNew
  • Mount Hole ID 113.100mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole 2 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM12x1.75
  • Rear Housing Offset at 2:00 from Rear View Compared to C653@ 6-Pin Regulator Harness Plug@ B+ Terminal Internally Threaded
  • See More See Less
  • Critical NoteRegulator sold separately. EMI Suppression to SAE J1113 Spec Will Not Cause Interference with the Vehicle's Communication Equipment
  • Volt12
  • Amps430
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM12x1.75
  • PolarityNegative
  • Brushless Design
  • The C680 Is a Custom Pad Mount Alternator with a 5.91" or 150.1mm Pad Mounting Hole Span Length.
  • 240A Output at Idle
  • Recommended regulator CEN-A2-155
  • See More See Less
  • Volt24
  • Amps300
  • ConditionNew
  • Regulator Clock12:00
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM12x1.75
  • PolarityNegative
  • Female Output Stud@ 180 Amps Output at Idle@ 6.9" Hinge Mount
  • See More See Less
  • Volt12
  • Amps60
  • ConditionNew
  • Regulator Clock3:00
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/4-20
  • Brushless
  • See More See Less
  • Volt12/24
  • Amps360
  • Regulator Clock8:00
  • Mount Hole ID 112.800mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole ID 212.800mm
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole ID 312.800mm
  • Mount Hole 3 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationInternal
  • PolarityNegative
  • Shaft Pulley OD0.874"
  • Shaft Pulley OD22.200mm
  • 12" Long Harness
  • See More See Less
  • Critical NoteWhen Replacing the C520 with the C527, You Will Need to Replace Regulator with the (5) Pin Version
  • Volt12
  • Amps360
  • ConditionNew
  • Pad Span Length126.24
  • Mount Hole ID 111mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole ID 211mm
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole ID 311mm
  • Mount Hole 3 TypeUnthreaded
  • Mount Hole ID 411mm
  • Mount Hole 4 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM10x1.50
  • PolarityNegative
  • Shaft Pulley OD0.875"
  • Shaft Pulley OD22.220mm
  • 5-Pin Regulator Plug
  • Requires A2-348 Regulator
  • See More See Less
  • Brushless Design
  • Direct interchange, is compatible with 190mm bracket.
  • Modular Rectifier Assembly
  • Amps360
  • ConditionNew
  • Critical NoteRegulator sold separately.
  • Fan LocationExternal
  • Mount TypePad
  • Regulator LocationExternal
  • Volt12
  • See More See Less
  • Critical NoteRegulator sold separately.
  • Volt12
  • Amps400
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/2-13
  • Brushless Design
  • Recommended regulator CEN-A2-128
  • Custom 7" Hinge Mounting Configuration
  • See More See Less
  • Critical NoteRegulator sold separately.
  • Volt12
  • Amps400
  • ConditionNew
  • Mount TypeJ180
  • Mount Hole ID 113.100mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole ID 2M12-1.75
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole 3 TypeThreaded
  • Alt Mounting Foot ID13.100mm
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal IDB+
  • Terminal Size1/2-13 Internally Threaded
  • Terminal ID 2B-
  • Terminal 2 SizeM10-1.5
  • PolarityNegative
  • Shaft Pulley OD22.200mm
  • Brushless Design
  • 225A Output at Idle
  • Meets SAE J1113 Specification for Noise Suppression
  • Recommended regulator CEN-A2-155
  • See More See Less
  • Critical NoteRegulator sold separately. This Unit Replaces Units #C711 & #C712 But the Regulator is Different and the Shaft for the #C714 is Larger So a New Pulley Must Be Used
  • Volt12
  • Amps400
  • ConditionNew
  • Mount Hole ID 110mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole ID 210mm
  • Mount Hole 2 TypeUnthreaded
  • Mount Hole ID 312.700mm
  • Mount Hole 3 TypeUnthreaded
  • Mount Hole ID 412.700mm
  • Mount Hole 4 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 SizeM12x1.75
  • PolarityNegative
  • Brushless Design
  • Recommended regulator CEN-A2-155
  • Custom 7" Hinge Mounting Configuration
  • See More See Less
  • Critical NoteRegulator sold separately.
  • Volt12
  • Amps400
  • ConditionNew
  • Fan LocationExternal
  • Regulator LocationExternal
  • PolarityNegative
  • Brushless Design
  • Recommended regulator CEN-A2-155
  • Custom 7" Hinge Mounting Configuration
  • See More See Less
  • Critical NoteThe Only Components That Can Be Serviced on This Unit Are the Cover, Fan, Pulley & Regulator@ Rebuilding This Unit Voids the Hazardous Location Certification
  • Volt12
  • Amps70
  • ConditionNew
  • Mount Hole ID 111.400mm
  • Mount Hole 1 TypeUnthreaded
  • Mount Hole 2 TypeUnthreaded
  • Fan LocationExternal
  • Regulator LocationInternal
  • PolarityInsulated
  • CSA Certified - Class I, Division 2 Group B, C & D T3C
  • See More See Less
  • Volt24
  • Amps50
  • ConditionNew
  • Regulator Clock3:00
  • Fan LocationExternal
  • Regulator LocationExternal
  • Terminal ID 2B+
  • Terminal 2 Size1/4-20
  • Brushless
  • See More See Less
    SKU: CEN-C570

    C.E. Niehoff Alternator

    Alternator 14 Volt 415 Amp
  • Critical NoteRegulator sold separately
  • Volt12
  • Amps415
  • ConditionNew
  • Mount TypePad
  • Fan LocationExternal
  • Regulator LocationExternal
  • Brushless Design
  • Design is compatible with 190mm bracket.
  • Recommended regulator CEN-A2-3108
  • See More See Less